01
Measure the width
Measure inside the opening at the top, middle, and bottom. Record all three measurements exactly as taken.
Back to the studioMeasure once.
DIY measuring guide
Measure once.
Feel confident.
Start with this simple guide for Zebra Shades and most roller-style shades. Keep every measurement exactly as taken. We will confirm the ordering size and any required factory deduction before your custom order is placed.
Steel tape Pencil Notes
00:30
Quick video Width, height, depth, and what to send us.
Before you begin
Five rules that prevent most mistakes.
- 01Use a steel tape measure, not a cloth tape.
- 02Measure every window, even when they look identical.
- 03Write width first, then height: W × H.
- 04Record to the nearest 1/8 inch.
- 05Do not make your own factory deduction.
Choose your mount
Where will your Zebra Shade sit?
Inside mount gives a built-in look. Outside mount covers more of the opening and can help when the frame is shallow or has obstructions.
Recommended forA clean, recessed finish
Confirm that the frame has enough flat depth for the Zebra cassette and that handles will not interfere.
02
Measure the height
Measure inside the opening at the left, center, and right. Record all three measurements exactly as taken.
03
Check depth and obstacles
Measure usable depth from the front edge toward the glass. Note locks, cranks, tile, trim, or anything the shade must clear.
Z
Zebra Shade detail
The cassette needs room too.
Zebra Shades roll into a cassette at the top. For an inside mount, send the usable frame depth and a straight-on photo so the cassette and fabric can be checked against the selected system.
- Photo of the full window
- Close-up of the frame depth
- Any handle or crank shown clearly
What to send
Label every window clearly.
Living room · Window 1W × HInside or outside mount · Depth · Photos
Send each window as its own line with all measurements in inches. Keep the original numbers. Do not subtract for clearance or hardware.
Build my quoteThis is a general DIY guide. Final measuring rules can vary by product, cassette, and motor. Wait for confirmation before ordering or drilling.